|
A numerically controlled oscillator (NCO) is a digital signal generator which creates a synchronous (i.e. clocked), discrete-time, discrete-valued representation of a waveform, usually sinusoidal. NCOs are often used in conjunction with a digital-to-analog converter (DAC) at the output to create a direct digital synthesizer (DDS). Numerically controlled oscillators offer several advantages over other types of oscillators in terms of agility, accuracy, stability and reliability.〔(【引用サイトリンク】 url = http://www.latticesemi.com/products/intellectualproperty/ipcores/numericallycontrolledosci/index.cfm )〕 NCOs are used in many communications systems including digital up/down converters used in 3G wireless and software radio systems, digital PLLs, radar systems, drivers for optical or acoustic transmissions, and multilevel FSK/PSK modulators/demodulators.〔 ==Operation== An NCO generally consists of two parts: *A ''phase accumulator'' (PA), which adds to the value held at its output a frequency control value at each clock sample. *A ''phase-to-amplitude converter'' (PAC), which uses the phase accumulator output word (phase word) usually as an index into a waveform look-up table (LUT) to provide a corresponding amplitude sample. Sometimes interpolation is used with the look-up table to provide better accuracy and reduce phase error noise. Other methods of converting phase to amplitude, including mathematical algorithms such as power series can be used, particularly in a software NCO. When clocked, the phase accumulator (PA) creates a modulo-2N sawtooth waveform which is then converted by the phase-to-amplitude converter (PAC) to a sampled sinusoid, where N is the number of bits carried in the phase accumulator. N sets the NCO frequency resolution and is normally much larger than the number of bits defining the memory space of the PAC look-up table. If the PAC capacity is 2M, the PA output word must be truncated to M bits as shown in Figure 1. However, the truncated bits can be used for interpolation. The truncation of the phase output word does not affect the frequency accuracy but produces a time-varying periodic phase error which is a primary source of spurious products. Another spurious product generation mechanism is finite word length effects of the PAC output (amplitude) word. The frequency accuracy relative to the clock frequency is limited only by the precision of the arithmetic used to compute the phase.〔 NCOs are phase- and frequency-agile, and can be trivially modified to produce a phase-modulated or frequency-modulated output by summation at the appropriate node, or provide quadrature outputs as shown in the figure. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「numerically controlled oscillator」の詳細全文を読む スポンサード リンク
|